go to Fabric Structure community Home

Purchase or rent a textile structure: framed, tensile or air supportedRequest a quote

Home   |   FAQ   |   About FStructures   |   Members   |   RSS
MEMBRANE STRUCTURES
INFLATABLE BUILDINGS
PARTY HALLS
PORTABLE HANGARS
PARTY TENTS
PARTY HALLS FOR RENT
TECH TEXTILE
SUPPLIERS
OTHER
MARKETPLACE
OTHER
MEMBERS

Marketplace

Request for temporary steel structures from Israel.

Author: admin
This information is available for members only.
' />

Country - Israel
Length (m) - 18
Width (m) - 10
Wall height (m) - 3
Type - Insulated
Type (2) - Relocatable
Foundation - Needed
Halls covering material - PVC roof / metal sheet sides
Quantity - 1
Dimmensions - 7 meters wide, 2 meters tall (clearance while open)
Door / gate place - front
Planning exploitation date - ASAP
Purpose of use - Portable Storage of UAV
Additional information - Please contact ASAP for further information if the initial data given here seem relevant to your company's products.

General description
 - The tent shall have a full cover of the area including roof and surroundings.

Size
 - The tent shall have the capability to store 2 fully assembled Aerostar platforms with the minimum following dimensions options:
    - Option 1 (desired): 17 x 6.5 x 2.5 (length, width and height respectively, all numbers given in meters) hangar which can hold 2 Aerostar platforms in a "wing-by-wing" configuration.
    - Option 2: 8.5 x 14 x 2.5 (length, width and height respectively, all numbers given in meters) hangar which can hold 2 Aerostar platforms in a "tail-by-nose" configuration.
    - Front door: 8 x 2 (width and height respectively) meters clearance while door is fully opened.

Air conditioning
 - The tent shall be equipped with an air conditioning system with heating and cooling capabilities. The system shall be operable in extreme weather conditions (-20°c - 50°c) and supply fair environment temperature under these conditions.

Mobility
 - The tent, along with its sub-systems shall have a packing solution which will allow its mobility.

Durability
 - The tent should be water and dust proof.
 - The tent should tolerate 50 knots winds.

Electric power
 - An electric panel with power distribution capability is necessary.
 - The tent should have its own 12 KVA power plant or have connectivity means to outer source.
 - The tent's ceiling should have lighting to allow night working.



Contact information:

This information is available for members only.

Rating: have not been rated yet
Your rate:
Viewed: 1910 Comments (0) Share this article »



Your company is capable producing a tension structure or an inflatable building ? Join us and publish your structure photos and information about your product on Fabric Structure community site for free!

Username
Password
 
Useful information: Techtextil  |   IFAI  |   Tensinet  |   Textile Roofs   About FStructures   |   Members   |   Legal   |   Contact us